This guide will help you configure a Geonode proxy in the ClonBrowser browser.


Prerequisites: Get Proxy Credentials from Geonode

Before setting up a proxy, first, retrieve your proxy credentials from the Geonode dashboard.


Steps: Setting Up a Proxy in ClonBrowser

Follow these steps to configure a proxy in ClonBrowser:

Step 1: Install ClonBrowser

  1. Go to the ClonBrowser Download Page.
  2. Download the browser based on your operating system.
  3. Install the software and create an account.

Step 2: Create a New Profile

  1. Open ClonBrowser and click the Add Profile button.

  2. Enter the required details:

    • Profile name
    • Operating system
  3. You can randomize the fingerprint for additional security.

  4. On the right side, review your browser details.


Step 3: Add a Proxy Details

  1. Click on proxy tab.

  2. Select a connection type (For this guide, we will use HTTP).

  3. Enter your proxy details:

    • Proxy (IP:Port)
    • Username
    • Password
  4. Click on create profile


Step 4: Check the Proxy Connection

  1. Click the Connect Test button to verify the connection.

  2. If successful, the proxy will show as working.


Step 5: Create and Launch the Profile

  1. Click the Create Profile button to save your settings.

  2. Once created, you will see the profile listed.

    • If the proxy shows a location, it means the proxy is active.

  3. Click the Start button to launch the browser with your configured proxy.

Your Geonode proxy is now successfully configured in ClonBrowser.


If you encounter any issues, refer to the troubleshooting section or Geonode support.


FAQs